Testing and certification | Heru Networks Ltd

What's included

Copper certificationCat6 and Cat6A links certified on a Fluke Networks DSX-8000 against the standard in your specification.

Fibre loss testingSingle-mode and multimode links tested with a CertiFiber Pro quad module.

MPO testingPre-terminated MPO links tested and reported to the cut sheet.

Fault findingFailed or suspect links traced, repaired and retested, on new or existing cabling.

Test limits are set from your specification before testing starts.
Every link is tested, not a sample, and saved under its label ID.
Any failure is investigated, fixed and retested, and the retest is what goes in the report.
Results are exported as reports and included in the handover pack.

A full set of test reports matched to the label schedule, so anyone can pick a link on site and find its result. See an example of how we present results.

Can you test cabling someone else installed?

Yes. We can certify existing cabling, find faults or give you an independent baseline before changes are made.

Do you send the raw results as well as a summary?

Yes. The handover pack includes the full reports, not just a pass list.

What standard do you test to?

The one in your specification. We confirm the standard, cable category and test limits with you before we start.